
Final sale: bathroom safety equipment cannot be returned or exchanged unless damaged, defective, or incorrect on arrival.View return policy.
At a glance
Drive Medical Folding Universal Sliding Transfer Bench
The seat slides instead of asking you to shuffle. Before that helps, it has to sit above your tub wall, and this one starts higher than most.
Start here
Measure your tub wall, floor to the top.
Every transfer bench lives or dies on this one number, and it is the number nobody can look up for you. On this bench it matters twice over, because the range starts high.
- 1Stand outside the tub, on the bathroom floorThis is taken from the room side, not from inside the tub
- 2Put the end of the tape on the floor, against the tubRight where the outside face of the tub meets the floor
- 3Run it straight up to the top of the wallStop at the highest point of the rim, not at the tiles above it
- 4Read the number and write it downThat is your tub wall height, and it is what the seat has to clear
- ✓Height 21 to 25 inDrive's own row label and figures for model RTL12075
- ✓Half inch steps between settingsDrive publish the seat height as adjusting in half inch increments
The 21 in floor is the part to read twice. This bench cannot be set lower than that, so a low sided tub gives you a seat that stands well proud of the rim. A tub wall between 21 in and 25 in is the shape this bench was drawn for, and that is a range worth checking before anything else.
iTake the tape to the tub once and you are covered. Wall height does not change, so the number answers this bench, the fixed transfer benches, a clamp on rail and a bath lift, all from one reading.
Off the floor
A four inch window, starting higher than most.
Drive publish the range. Here is what it comes to once your own measurement goes into the sum, worked in the open.
- +21 in, the lowest settingBottom of the Height range for RTL12075
- +25 in, the highest settingTop of the same range
- =4 in of travel, taken in half inch stepsThe whole window you have to work in
Now put your own number in. A tub wall measured at 15 in leaves 6 in of clearance even at the lowest setting, which is a long step up for the person sitting down outside. A wall at 20 in leaves 1 in at the bottom of the range and 5 in at the top. A wall at 24 in sits neatly inside the window with a setting either side of it.
The seat itself is 22.5 in across and 18.5 in front to back, both Drive's published figures, and it is the part that travels along the frame rather than the whole bench moving.
iHere is the check that matters. Set the height, then sit on the outside end and slide once, dry, before any water goes in. The seat should move without the frame shifting under you and stop where the lock catches. If the frame moves, a leg is half an inch out and it is a quick fix.
After it is yours
Covered for as long as you own it.
Drive put a Limited Lifetime warranty on this bench, model RTL12075. Here is the term exactly as they publish it.
- ✓Limited Lifetime, in Drive's own wordsPrinted on the warranty row against model RTL12075
- ✓No end date to watchA lifetime term does not expire, so there is nothing to put in the calendar and no reminder to set
- ✓A removable soap dish and a safety netDrive publish both as standard on this model, and both are the sort of part worth knowing you already have
Drive publish the term and not the conditions behind it. We print the term exactly as it stands rather than paraphrase conditions nobody has written down.
iWorth keeping: your Care Made order confirmation. It carries the date and the model number, which is where any warranty claim begins. Hold on to that email and there is nothing else for you to do.
Drive Medical Transfer Bench with Sliding Seat and Fold-up legs, 300 Lbs Weight Capacity
Compare Transfer Benches
Three ways to safely move into and out of the tub.
⭐ Smoothest TransferSliding Transfer Bench | Best ValueTransfer Tub Bench | Most ComfortablePadded Transfer Bench | |
|---|---|---|---|
| Type | Folding sliding transfer bench | Reversible transfer bench | Padded reversible bench |
| Padded Seat & Backrest | ✗ | ✗ | ✓ |
| Side Handles / Arms | ✓ | ✗ | ✗ |
| Sliding Seat | ✓ | ✗ | ✗ |
| Bridges Tub Wall | ✓ | ✓ | ✓ |
| Folds for Storage | ✓ | ✗ | ✗ |
| Reversible (left/right install) | ✓ | ✓ | ✓ |
| Height Adjustable | ✓ | ✓ | ✓ |
| Weight Capacity | 300 lb | 400 lb | 400 lb |
| Tool-Free Assembly | ✓ | ✓ | ✓ |
| Best For | Smoothest tub entry, least strain | Stepping safely over the tub wall | Long bathing or sensitive skin |
| Price (CAD) | $254 $289 | $174.95 $199 | $169.95 $199 |
| View Product | View Product | View Product | View Product |
Frequently Asked Questions
-
The seat is mounted on high-quality aluminum rails and slides smoothly from the outside of the tub to the inside. It features a secure locking mechanism that keeps the seat in place while you are getting on or off, ensuring you only move when you are ready.
-
Yes! Unlike bulky traditional benches, this model features a "Universal Folding" design. It can be easily collapsed and tucked away when not in use, making it the perfect choice for shared bathrooms or for taking along when traveling.
-
Despite its lightweight folding design, this bench is incredibly strong and has a maximum weight capacity of 300 lbs (136 kg). The frame is constructed of durable, rust-resistant aluminum to withstand daily use in wet conditions.
-
Yes. The bench offers completely tool-free assembly and can be adjusted in height to fit almost any bathtub. It includes a safety belt for added security during the transfer and the blow-molded plastic seat is easy to wipe down with standard household cleaners.
-
Drive Medical publish a height range of 21 to 25 inches for this bench, and a seat 22.5 inches wide by 18.5 inches deep. Measure from your bathroom floor to the top of your tub wall first. If that measurement sits inside 21 to 25 inches the bench will set level across your tub, and the seat can then slide you in and out.



